Quality AR500 steel targets that don't break the bank.
Orders over $200 ship free!!
Orders over $200 ship free!!
Key/Hook T-post hanger
$33.00
This compact, light versatile hanger is made entirely of AR500 steel. One side has our popular keyhook hangar and the other the more common hook hanger. It slips easily on any standard t-post. It's the best of both worlds for one low price!
We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?
rimfire mover 10 travel
$1,800.00
Dual powered 110V or 12V rimfire target mover, modular light weight design allows for easy transport and simple setup. This mover can be utilized with dual targets above or below the guarded rails. The target moves at 1MPH which gives a very similar lead with 22lr to a centerfire mover at 3MPH. Initial setup from box to running takes one person 20-30 minutes with standard tools (9/16, 5/8 and 17mm wrench and sockets), following setups are dependent upon how far the unit is disassembled.
unit will come with 3 sections of rail, 2 end sections, target carriage, drive chain, leg brackets, legs, control unit, 2 dampening target mounts, 110V cord,12Vcord and all hardware required for assembly.
Lead time will be 4 weeks from order, 6 weeks if selecting powder coating. Shipping within contiguous united states included.
Youtube video/info:
https://www.youtube.com/watch?v=Wpcf0BFPueg
https://www.youtube.com/watch?v=Gs9BlyLXXoo
Customer Videos:
3/8" Square 4 Piece set with hangers
$277.00
This set includes:
- 6" AR500 Target
- 8" AR500 Target
- 10" AR500 Target
- 12" AR500 Target
- 4 Key/Hook Hangers
Utilizing our tool-less hanger system that really lets these target move and ring.
We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?
Rimfire 8 Piece Circle Set with hangers
$105.00
This set includes 8 Targets and hangers
- 1" hanging target
- 1.5" hanging targets
- 2" hanging targets
- 2.5" hanging targets
- 3" hanging targets
- 4" hanging target
- 5" hanging target
- 6" hanging target
We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?
IPSC 3/8 3 piece set with hangers
$270.00
This set includes:
- 33% IPSC 6"x10"
- 45%IPSC 8"x13.5"
- 66% IPSC 11.5" x 20"
- 3 Key/hook hangers
3/8 AR500 steel. utilizing our no tool hanger system.
We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?
Rimfire Know Your Limits rack (KYL)
$185.00
Set of 8 AR500 swinging targets fully welded to DOM tube for smooth action and longevity. From the box to shooting in tool free minutes. Targets ship unpainted
Set included:
- 2" target (1/4" AR500)
- 1 3/4" target (1/4" AR500)
- 1 1/2" target (1/4" AR500)
- 1 1/4" target (1/4" AR500)
- 1" target (1/4" AR500)
- 3/4" target (1/4" AR500)
- 1/2" target (3/8" AR500)
- 1/4" target 3/8" AR500)
- cross bar
- 2 leg brackets
- 4 pin together legs
- 4 leg extentions
- 4 ball dent pins
We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?
Novelty Rimfire Targets-Singles
$9.50 - $19.00
Single various shaped novelty targets. The more detailed the target, the easier it will break, so keep that in mind.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.