Orders over $200 ship free!!
We strive to make affordable targets that are easy to set up and fun to shoot so our customers can spend less time turning bolts and more time shooting targets. Targets are carefully engineered with reactivity and durability as a highest priority in each design.
Rimfire Target Lock
Have mini targets that want to swing to the fences? Would you rather keep them where they belong? Then this guy is for you. Two bolts that once fixed and lightly loosened can keep targets in place but allow you to still change them without tools at the range. Pair with our rimfire hanger stand for quick and easy plinking setup. Ask for the drill guide if you'd like to alter existing hangers to use this lock.
Coyote at Attention 3/8"
Utilizing our tooless hanger system that really lets these target move and ring.
We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?
Bobcat 3/8"
Fun bobcat target in 3/8" AR500.
We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?
walking coyote 3/8"
Utilizing our tool-less hanger system that really lets these target move and ring
We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?
1/4" Squares
Utilizing our tooless hanger system that really lets these target move and ring.
We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?
3/8" Squares
Utilizing our tool-less hanger system that really lets these target move and ring.
We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?
3/8" Circles
Utilizing our tool-less hanger system that really lets these target move and ring. Select your size below.
We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?
1/2" Circles
This target utilizes our tool-less hanger system that really lets these target move and ring. Key-lock and hook compatible hole works with most hanger systems. We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?
1/2" Squares
This target utilizes our tool-less hanger system that really lets these target move and ring. Key-lock and hook compatible hole works with most hanger systems.
We design our products with durability, reactivity and acoustics in mind. With our free hanging systems products can move and ring while still remaining engaged on the hanger. They can also be bolted to various other hanging systems, but it will dampen the movement and sound.
We also take convenience and ease of use into consideration when designing our hanging systems. Most of our hanger systems are tool-less and set up in minutes. Time is precious, so we don't want to waste your fiddling with bolts and wrenches.
Cut from AR500 Steel. AR500 steel provides the best mix of hardness to not crater and cause erratic ricochet patterns, while not being so hard as to become brittle.
This product is cut with a water table cooled plasma torch. Targets are cool to the touch right after being cut. After being cut smaller targets are tumbled, while larger targets are wire wheeled to remove dross. They are then quality checked for fit with our hanger systems and ready to be used. You can apply spray paint if desired.
Powder coating, while available, is not recommended. While it is durable, it will certainly not stand up to being shot. We offer our products "in the raw" because it saves you money. And who doesn't like saving money?